Operation is subject to the following conditions: 1. While the airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the system immediately. Please refer to, Installing the Child Restraint System for typical installa- tion instructions. If you do not read this entire manual you may miss important information. The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. This is an indication that the gas cap is properly tightened. Inspect engine air cleaner filter, replace if neces- sary.
Inspect engine air cleaner filter, replace if neces- sary. Check spare tire for proper pressure and correct stowage. Direct the panel outlets toward the side windows. Press this switch to lock or unlock the doors. Economy— Improper inflation pressures can cause uneven wear patterns to develop across the tire tread.
This manual covers every service and repair imaginable, from oil changes to rebuildingthe transmission. Always wear your seat belts even though you have airbags. This may allow the airbag to have different rates of inflation that are based on collision severity and occupant size. On left rail, remove bracket located on inner rail. Inspect auto tension drive belt and replace, if re- quired. Opening a door with the Security Alarm activated will cause the alarm to sound.
There are steps that you can take to slow down an impending overheat condition. Skin oils may cause battery deterioration. Take care never to scratch the paint. Your dealer has touch up paint to match the color of your vehicle. Clean all repaired areas and apply appropriate refinish and corrosion protection materials. Do not spin the wheels continu- ously for more than 30 seconds. This is an indication that cap is properly tightened.
Weight Distributing Systems may not be compatible with Surge Brake Couplers. You could lose control and have an accident result- ing in serious injury or death. Coolant Level The coolant bottle provides a quick visual method for determining that the coolant level is adequate. This procedure may be repeated with a new user. This feature plays the selections on the compact disc in random order to provide an interesting change of pace.
If the trailer weighs more than 1,000 lbs 454 kg loaded, it should have its own brakes and they should be of adequate capacity. This center contains cartridge fuses and mini fuses. . A poorly fitting gas cap may cause the Malfunction Indicator Light to turn on. This service offers over 100 channels of music, sports, news, entertainment, and programming for chil- dren, directly from its satellites and broadcasting studios. Once the air conditioning is engaged, use a combination of the mode control, fan.
Satellite Antenna To ensure optimum reception, do not place items on the roof around the rooftop antenna location. Press and hold the time button until the hours blink. It is recommended that before installing the child restraint, buckle the seat belt so the seat belt is tucked behind the child restraint and out of reach. The right hand control is a rocker type switch with a push button in the center. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged with the lift area closest to the wheel to be changed. Push anchorage button to release the anchor- age, and move it up or down to the position that serves you best. The best coating in the world is not effective unless it is present in the right place at the right time.
The rearview mirror contains the microphone for the system and the control buttons that will enable you to access the system. Right rail section location: When installation of new tip is complete, there is a 6mm hole on the inner rail at the forward edge of the section joint which may need to be recreated or restored. Therefore, make sure the keys are not inside the vehicle before closing the door. Do not attempt to push or tow your vehicle to get it started. Our books have clear instructions and hundreds of photographs that show each step. Trailer Sway Control The trailer sway control is a telescoping link that can be installed between the hitch receiver and the trailer tongue that typically provides adjustable friction associated with the telescoping motion to dampen any unwanted trailer swaying motions while traveling. Galvanic corrosion is the type that occurs when dissimilar metals are in electrical contact while immersed in an electrolyte.
Examples include spot weld lap joints, threaded or riveted connections, gasket fittings, porous welds, valve seats. Refer to the Tire— Safety Information Section in this manual. Floor Air is directed through the floor outlets and side window demist outlets with a small amount through the defrost outlet. Contact your dealer, service station, or governmental agency for advice on how and where used oil can be safely discarded in your area. Such entrapment may result in serious injury or death.